How To Make A Drop Down Loft Hatch Door

Whatever you’re utilising your loft area for, whether it’s extra storage, upgrading your insulation, or perhaps just making any required repairs, easy gain access to is a must. So with that in mind, we’ll show you how to make a drop down loft hatch door that will make your life a lot simpler when it pertains to getting ‘up there’.

Traditionally, getting into house loft areas was a cumbersome workout. Fortunately, more recent homes generally use upgraded drop down loft hatches for ease of use, total with insulated backing for energy efficiency. However, if you’re wanting to develop a brand-new loft hatch, here’s what you require to know.

You don’t need to be a DIY specialist when looking into how to make a fall loft hatch door, but some experience will help. Always ensure you have the right tools for the job, wear safety devices, and refer to any handbook for directions and safe operation of any tools.

Preparation
Prior to you can install your loft hatch door, you’ll need to find and prepare a suitable opening in your ceiling. Most convenient and practical gain access to is typically found in the hallway, but ensure your prepared hatch is at least 100mm from any wall or obstruction. Utilising a stud, pipeline, and wire detector will ensure you’re not cutting into anything you shouldn’t. It will also discover your ceiling joists which will identify the final position of your gain access to hole.

Use a pencil to mark where the joist edges are and where your hatch will be, and using a drill and correct drill bit, create enough holes that will allow you to place a handsaw. Cut along the lines you’ve made. As soon as the hole is developed, the next step is to create the loft hatch frame surround.

Your Loft Hatch Frame
Made up of extra pieces of planed wood, around 20mm thick, careful measuring is required as these are cut to size and connected at right angles to the ceiling joists, and along with the joists themselves. These will develop the frame for your hatch door without putting unnecessary tension on the ceiling joists themselves.

By screwing or nailing each piece of wood into position, you’ll have an ideal frame to connect you hatch door to. However, don’t over tighten your nail or screw your frame fittings just yet. This will make it easier to move any piece, in case it’s not positioned correctly first time. As soon as whatever’s in its proper position, tighten them all up.

How To Make A Drop Down Loft Hatch Door
To produce a simple drop down hatch door, use a slice of plywood cut to the size of the hatch, ensuring there is clearance when opening, and edge it with 25 x 50mm planed timber. This edging is required so you can affix your hinges. As soon as the hinges and an appropriate catch are in place, your new loft hatch and door is ready to use.

Post Sponsored by Your Local Roofer – Find Us by typing in ‘Roofer Near Me‘ in your Google search.

What Should I Use To Re-Roof My Shed?

If you’re fortunate enough to have a garden shed, you’ll already understand all about the advantages of owning one. Lots of storage space for tools, bikes, and garden furniture, and who knows, perhaps some peace and quiet? But whatever you use your shed for, its benefits depend on keeping it in good condition.

As you might expect, there’s great deals of option available for shed roof. Though each option has its own merits and weatherproofing abilities, the option mainly, comes down to individual option, budget, and, not forgetting your own level of DIY ability. So let’s have a look at a few of the more popular options.

Roofing Felt
For proven, all-round weather condition security is at its best, you will not go far wrong with traditional shed roof felt. Without a doubt the most common shed roof product, it supplies all round weatherproofing that’s tough to beat, offering all year protection from the components, consisting of UV, and keeping whatever watertight.

Offered in rolls of 8 – 10m x 1m at around ₤ 20 – ₤ 30 per roll, the black or green bitumen backed felt can be easily applied to your shed by presenting across the existing roof and fixing with nails. This will provide a lasting protection of around 5 years, but there are reinforced options that give a far longer protection if needed.

Bitumen Roofing Sheets
For a more conventional finish, these corrugated, bitumen-backed sheets are a lightweight alternative for your shed roofing, but are no less efficient in their waterproofing capabilities. Flexible and hard-wearing, these tough sheets will provide you years of upkeep complimentary security.

Each sheet determines 950 x 2000mm and simply 3mm thick and can be found in 4 different colours. Quickly set up, they can round off with a matching coloured ridge, offering you amount to weather and UV protection. Each sheet has a 15-year waterproofing warranty, and at around ₤ 15 per sheet can be an economical finish too.

Bitumen Shingles
Similar to roofing felt in the way they’re produced, bitumen-backed roofing shingles provide you the same level of waterproofing and weather defence. But, rather than rolls, these shingles can be found in 1m strips with pre-cut tabs to give the appearance of tiles for a timeless surface.

Offered in 4 colours, these light-weight, long lasting tile strips are simple to install and come with an option of square, round, or hexagonal shaping. Each strip provides you adequate overlap for optimum protection and have outstanding UV resistance. Readily available in multi-packs covering approx 3m2 for around ₤ 25, shingles will offer you a great looking and lasting surface.

Years Of Protection
The key to the long life of any shed is keeping it watertight, which constantly starts with the roofing system. By checking it throughout the year, you’ll be able to find prospective problems before they buckle down and the leakages start. By using quality materials like these, a brand-new shed roofing system ought to last you an excellent variety of years.

Post Sponsored by Walthamstow Roofing – We Are Here for all Your Roof Leaks in Walthamstow