How To Make A Drop Down Loft Hatch Door

Whatever you’re utilising your loft area for, whether it’s extra storage, upgrading your insulation, or perhaps just making any required repairs, easy gain access to is a must. So with that in mind, we’ll show you how to make a drop down loft hatch door that will make your life a lot simpler when it pertains to getting ‘up there’.

Traditionally, getting into house loft areas was a cumbersome workout. Fortunately, more recent homes generally use upgraded drop down loft hatches for ease of use, total with insulated backing for energy efficiency. However, if you’re wanting to develop a brand-new loft hatch, here’s what you require to know.

You don’t need to be a DIY specialist when looking into how to make a fall loft hatch door, but some experience will help. Always ensure you have the right tools for the job, wear safety devices, and refer to any handbook for directions and safe operation of any tools.

Preparation
Prior to you can install your loft hatch door, you’ll need to find and prepare a suitable opening in your ceiling. Most convenient and practical gain access to is typically found in the hallway, but ensure your prepared hatch is at least 100mm from any wall or obstruction. Utilising a stud, pipeline, and wire detector will ensure you’re not cutting into anything you shouldn’t. It will also discover your ceiling joists which will identify the final position of your gain access to hole.

Use a pencil to mark where the joist edges are and where your hatch will be, and using a drill and correct drill bit, create enough holes that will allow you to place a handsaw. Cut along the lines you’ve made. As soon as the hole is developed, the next step is to create the loft hatch frame surround.

Your Loft Hatch Frame
Made up of extra pieces of planed wood, around 20mm thick, careful measuring is required as these are cut to size and connected at right angles to the ceiling joists, and along with the joists themselves. These will develop the frame for your hatch door without putting unnecessary tension on the ceiling joists themselves.

By screwing or nailing each piece of wood into position, you’ll have an ideal frame to connect you hatch door to. However, don’t over tighten your nail or screw your frame fittings just yet. This will make it easier to move any piece, in case it’s not positioned correctly first time. As soon as whatever’s in its proper position, tighten them all up.

How To Make A Drop Down Loft Hatch Door
To produce a simple drop down hatch door, use a slice of plywood cut to the size of the hatch, ensuring there is clearance when opening, and edge it with 25 x 50mm planed timber. This edging is required so you can affix your hinges. As soon as the hinges and an appropriate catch are in place, your new loft hatch and door is ready to use.

Post Sponsored by Your Local Roofer – Find Us by typing in ‘Roofer Near Me‘ in your Google search.